Get the Editable ITP Template for the Inspection and Test Plan for Installation of Emergency Diesel Generators with Inspection Checklists to use at construction sites.
Purchase this complete, editable ITP template for diesel generators installation for the low price that is less than the cost of an hour of your time.
This template contains editable MS Word & Excel files that you can use and update as per the specifications and requirements of the project you are working on.
What You Will Get With This Diesel Generator Inspection & Test Plan Template
This ITP Template includes the following 3 main components :
1 – Quality Control Procedure (QCP) for Installation of Emergency Diesel Generators
This is a document that explains in details the Scope, Purpose, Definitions, References, Responsibilities & Procedure in clear and defined steps for the testing activities mentioned in the ITP (item # 2 below).
Here’s a screenshot from the QCP For Installation Of Emergency Diesel Generators:
2 – ITP – Inspection And Test Plan Template for Emergency Diesel Generators Installation
The complete table of inspection and testing activities that shows each activity to be performed in order to make sure that the installed Emergency Diesel Generators are compliant to the project’s specifications and requirements, the reference to be followed, acceptance criteria, responsible personnel, related checklist (from item # 3 below), the required level of interference from each party (Contractor, Consultant, Third Party) such as: Inspection, Survey, Report Review, Witness & Hold.
Here’s a screenshot from the ITP Template For Emergency Diesel Generators Installation
3 – Emergency Diesel Generators Installation Checklists
These are the complete emergency diesel generators installation inspection checklists where the result of each inspection and measurement made on the installed Generators is registered with space for Remarks and Notes.
Total 45 forms:
- Rotating Equipment Initial Alignment Inspection.
- Equipment Installation Inspection Checklist (Rotating Equipment).
- Generator Inspection Record.
- Instrument Loop Check Sheet.
- Installation of Motors Inspection / Test.
- Test Record for Low Voltage Motors.
- Neutral Earthing Resistor Inspection Report.
- Generator Pre-Commissioning Report.
- Synchronous Generators Report of Electrical Measurements.
- Report of Test for Synchronous Generators Excitation System.
- Report of Test for Synchronous Generators Protection Relays.
- Report of Synchronous Generators Short Circuit Test.
- Report of Synchronous Generators No Load Test.
- Report for Test on Synchronous Generators – Loading Test.
- Excitation System Checks Report.
- Synchronization Checks and Tests.
- Inspection Check/Test List – Generator Control Panel.
- Genset Auxiliary System – Verification of Correct Installation.
- Diesel Genset Air Intake System – Verification of Correct Installation.
- Diesel Genset Exhaust Gas System – Verification of Correct Installation.
- Control Panel – Checks & Tests before Energizing the Electrical Installation.
- Control Panel – Checks & Tests – Commissioning.
- Short Circuit Tests & Measurements (Reduced Voltage Test).
- Synchronous Generators – No-Load Test-Run.
- Synchronous Generators – Performance Test after Synchronization.
- Generator Test Run Record.
- Inspection of Earth Continuity Test of Field Equipment.
- Low Voltage of Switchgear & Motor Control Center ( LV Circuit Breaker).
- Testing of HV/MV Circuit Breakers.
- Inspection of HV/MV Circuit Breakers.
- Small Power Transformers Final Inspection.
- Low Voltage Cable Test & Checklist after Installation.
- Medium & High Voltage Cable Test & Checklist after Installation.
- Battery Installation Inspection Record.
- Battery Charging Report.
- Battery Charger Installation & Inspection Record.
- Battery Charger Final Inspection & Testing Record.
- Inverter Control Panel (UPS) Inspection & Test Report.
- Inverter Control Panel (UPS) Post Installation Inspection Record.
- Battery Discharge Test Record.
- Flood Light, Road & Column Mounted Lighting Installation Report.
- Lighting Circuits Termination Inspection & Testing.
- Measurements of Illumination Levels.
- Minimum Permissible Insulation Resistance for Generator Windings.
- Minimum Permissible Insulation Resistance for Cables.
Here’s a screenshot from one of the different Quality Checklists available in this Diesel Generators ITP Template:
Click on the following image in order to download the ITP Template For Installation Of Emergency Diesel Generators
You will get a pop-up or get redirected to a secure page where you can buy the template and securely pay through PayPal or credit card.
The cost of this template is less than the cost of two hours of your own time if you want to start from scratch and create the Diesel Generators ITP Template & Inspection Checklists by yourself.
And after paying, you will receive an email with the download link.
==========================
Want a better deal?
Smart Deal – 49% OFF on The Complete Package – 12 ITP’s for the Price of 6
We are currently offering a massive discount. If you decide to get the complete package of all of the available twelve ITP templates for Electrical Works, you can get it at a discounted price of $299 instead of buying the twelve templates individually at a total cost of around $588.
=================================
Note: These Inspection and Test Plan Templates & Checklists for Electrical Works are available for sale only through this website Inspection And Test Plan Templates and through our affiliated sites and our store on https://payhip.com/itptemplates, and can be used for each project after purchase.
You may not re-purpose, distribute or resell the purchased templates for other than the project they were initially purchased for.